IDS 805 CID Connection and programming
How to connect the wires from the panel dialer to the radio RING and TIP
Take 2 wires (green and yellow) and connect them to the LINE into the panel dialer board. Connect the green wire R (RING) onto the negative on the CID Radio, and then the yellow wire to T (TIP) on the CID Radio
Use cabtyre 0.5m for positive and negative from the battery connector BTE7 Battery extender to the radio positive and negative connection
How to program the IDS 805 alarm for CID (Contact ID) reporting
Go to the following Locations in the programming
1. Enter programming mode by pressing 9999* (default)
2. Press 43 then * and press 1 then *
3. Press 44 then * and press 2 then *
4. Press 45 then * and press 3 then *
5. Press 46 then * and press 4 then * (These locations 43 to 46 is to program the telephone number)
6. Press 47 then * and press 6 then * (This location 47 is to select the Contact ID option)
7. Press 48 then * and press 1 then *
8. Press 49 then * and press 2 then *
9. Press 50 then * and press 3 then *
10. Press 51 then * and press 4 then * (These locations 48 to 51 is to program the account code)
Exit programming by pressing # #
Test system and notice that the dialer will click to dial and send information