Programming SMX CID to Texecom 412, 816 and 832

[Pierre_P]

Texecom 412/816/832 Dialer connection
Dialer Board connection
Connect the RING from the panel to the Negative on the RDC radio and connect the TIP from the panel to the TIP on the RDC radio. Power the radio directly from battery and not the panel using the RDC BTE7 battery connector.

Step 1
Enter programming mode
Press installer code (1 2 3 4 default) Menu 9
Step 2
Press 70 to go to the location for programming the communicator
Press 1, 2, 5 and 8 for the options to be ON press YES/ARM to accept
Step 3
Press 71 to go to the location for programming ARC 1 communicator
Press 0 and type the telephone number 1 2 3 4 and press YES /ARM
Press 1 and type the account code 1 2 3 4 and YES/ARM
Press 2 and press 4 (Contact ID)
Press 3 and press 3 (Dial attempts)
Press 4 and ensure that the reporting for partitions is on if not press 1 2 3 4 to switch on the reporting partitions by pressing 1 2 3 4 press YES/ARM
Press 5 and ensure 1-8 is on and press YES/ARM
Press 8 and ensure that 2 is on and the rest are off
Press Menu once.
Press 99 to exit programming.